- Product description
-
Product description
Surge protection/network fine protection, type 3, according to EN 61643-11 for installation in Rapid 45 duct, device installation duct and underfloor systems. • Version-A with acoustic function display (switchable signal tone)• Quick and easy mounting• Low construction width of 22.5 mm• Colour: Pure white; RAL 9010 Application: The surge protective device secures downstream and nearby sockets.Surge protection device Type 3 (Class D) to VDE 0675 Parts 6−11 (DIN EN 61643-11)for installation in Rapid 45 trunking, device installation trunking and underfloor systems. - Technical data
-
Technical data
Blow-out no Colour Pure white; RAL 9010 Conductor cross-section, rigid (single-wire/multiwire), max. 1,5 mm² Dimension 255V Installation type Module Lightning protection zone LPZ 2→3 Maximum back-up fuse 16 A Maximum continuous voltage AC 255 Maximum discharge current (8/20 μs) 5 kA Network form Other Nominal discharge current (8/20 µs) 2,5 kA Nominal voltage AC (50/60 Hz) 230 V OBO_Nominal load current (input/output terminal) 16 A Operating temperature, max. 45 °C Operating temperature, min. -25 °C Protection rating IP20 Remote signalling no Response time <25 ns Signalling on device Acoustic SPD to EN 61643-11 Type 3 SPD to IEC 61643-1 Class III Test class, type 3 yes Version for Acoustic function display Connectivity options
Arrester surge current (8/20 µs) [total] 5 kA Combined voltage protection level [L-PE] 1500 kV Conductor cross-section, rigid (single-wire/multiwire), min. 1,5 mm² Max. mains-side overcurrent protection 16 Protection level [L-N] ≤1500 - All types
- Downloads
-
Declaration of conformity ÜSS 45-A-RW / 6117465 , 0.13MB , pdfSelection aid Selection aid, surge protection , 2.00MB , pdfTechnical information Technical information, ÜSS 45-A; ÜSS 45-O , 0.05MB , pdf
Turkey - English