- Product description
-
Product description
System solution, type 2, with MC4 connector for photovoltaic inverter with 1 MPP tracker
• Varistor arrester, connectable with cut-off unit in error-resistant Y circuit to VDE 0100-712 (50539-12)
• Low DC voltage protection level: < 4.0 kV (Voc max = 1,000V DC with V20-C/0-500PV)
• One PV string input (MC4 plug connector) at one MPP inverter input, up to 30A DC per terminal
• Pre-mounted in polycarbonate housing (IP66), UV-resistant for use outside
For DC protection of the inverter of photovoltaic systems.
If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary!
- Technical data
-
Technical data
Cable type for surge protection devices Power cable DC (PV) Colour Light grey; RAL 7035 Conductor cross-section, flexible (fine-wire), min. 25 mm² Conductor cross-section, rigid (single-wire/multiwire), max. 35 mm² DC network form yes Depth 94 mm Dimension 1000V DC Equipped with load-break switch no Installation type Pre-mounted in the housing IT network form no Lightning protection zone LPZ 1→2 Max. Input current per string 30 A Max. Input voltage DC 1000 V Max. Output current 30 A Max. PV voltage 1000 V Maximum back-up fuse 125 A Maximum continuous voltage DC 1000 Maximum discharge current (8/20 μs) 40 kA Monitoring function no Network form Other Nominal discharge current (8/20 µs) 20 kA Number of cable entries 4 Number of inputs 1 Number of string inputs 1 Operating temperature, max. 80 °C Operating temperature, min. -40 °C Other network form no Permitted temperature range, max. 60 °C Permitted temperature range, min. -5 °C Pole number 3 Pole version 3 Protection rating IP66 Protection rating IK code IK05. Remote signalling no Response time <25 ns Short-circuit resistant yes Signalling on device Visual SPD to EN 61643-11 Type 2 SPD to IEC 61643-1 Class II Test class, type 1 no Test class, type 2 yes Test class, type 3 no TN network form no TN-C network form no TN-C-S network form no TN-S network form no TT network form no Type of entry MC4 Version for For one MPP tracker and with MC4 connection Dimensions
Height 150 mm Width 190 mm Connectivity options
Max. mains-side overcurrent protection 125 - All types
- Downloads
-
Data sheet PVG-C1000S100 / 5088554 , 0.53MB , pdfCatalogue Überspannungsschutz , 28.42MB , pdfDeclaration of conformity PVG-C1000S100 / 5088554 , 0.17MB , pdfLabel approval VDE test report V20-PH , 0.05MB , pdfLabel approval DEKRA test report V20-PH , 0.08MB , pdfSelection aid Selection aid, surge protection , 2.00MB , pdf
Turkey - English