Installation principle
Buildings with a flat roof
In buildings with flat roofs, the grid method is generally used. Roof structures such as PV systems, air-conditioning units, roof dome lights and ventilators are protected with additional air-termination rods.
| 1 | Terminal block |
| 2 | Bridging component |
| 3 | Roof conductor holder |
| 4 | Cable brackets |
| 5 | Insulated spacer |
| 6 | Air-termination system stand |
| 7 | Air-termination rod |
| 8 | Fire protection bandage over insulated parapet cover |
| 9 | Expansion piece |
| 10 | Vario quick connector |
Buildings with gabled/pitched roof
The exposed points, e.g. the ridge, chimneys and any roof structures, must be protected with air-termination systems.
| 1 | Roof conductor holder for ridge tiles |
| 2 | Vario quick connector |
| 3 | Roof conductor holder |
| 4 | Round conductor |
| 5 | Air-termination rod |
| 6 | Cable brackets |
| 7 | Gutter clamp |
